WPC-UltraBond 90Category F

WPC Coupling Agent — Maleic-Anhydride-Grafted Polyolefin (WPC-UltraBond 90)

High-activity Maleic Anhydride functionalized polymer alloy combined with structural amide-wax processing lubricants. Engineered specifically for North American WPC decking, composite cladding, and structural profile extruders to improve cellulosic/wood-flour dispersion, reduce moisture absorption, and mitigate low-temperature environmental cracking under cold Canadian winter cycles. Buyer trials typically report reductions in processing rejects and improved freeze-thaw resilience.

Polypropylene REACH TDS SDS

View TDS View SDS Request Full TDS

Logistics & Documentation

Plastic-Pallet Option · Import Documentation Support

Lead Time: Depends on supplier availability, production schedule, shipping route and destination. Lead time and dispatch are confirmed with each quotation rather than published as a fixed figure.
Packaging Option: Injection-molded plastic pallets available on request as an alternative to wooden pallets, subject to supplier capability and order size.
Documentation Support: Import documentation support available. Available documents may include TDS, SDS, COA, origin documents and compliance declarations where applicable.

WPC Coupling Agent — Maleic-Anhydride-Grafted Polyolefin (WPC-UltraBond 90) — category illustration — Category illustration — actual product appearance may vary by grade and batch.

About this product

WPC Coupling Agent — Maleic-Anhydride-Grafted Polyolefin (WPC-UltraBond 90) — product overview

WPC-UltraBond 90 is a high-activity coupling agent designed specifically for wood-plastic composite (WPC) extrusion — decking, cladding and structural profiles. It combines a Maleic Anhydride-grafted PE/PP backbone with amide-wax processing lubricants, targeting two failure modes at once: poor bonding between the hydrophilic cellulose/wood-flour filler and the hydrophobic polyolefin matrix, and low-temperature environmental cracking on decking exposed to Canadian freeze-thaw cycles. The commercial value proposition is fewer processing rejects and better long-term outdoor durability on the finished board. Loading level is formulation-specific and depends on the wood species, moisture, filler content and target profile geometry; validation on the buyer's line is recommended.

Document & COA status

• TDS: Displayed properties are an Allzone technical reference; manufacturer documentation is available on request.
• SDS: Safety data is subject to grade and supplier confirmation. One SDS does not necessarily apply to every grade or supplier.
• COA: Certificate of Analysis is provided against the confirmed shipment, grade and batch. No stock, lead-time or regulatory claim is implied without written confirmation.

Technical Data Sheet

TDS · WPC-UltraBond 90

Product form

Pellets (cylindrical, 2–4 mm)

Appearance

White

Carrier / matrix

MA-Grafted PE/PP + Amide-Wax Lubricants | Advanced Polymer Alloys & WPC Modifiers | Additives

Key Physical & Chemical Properties

Active grafted MA content	0.8 – 1.2 %
Bulk density	0.92 – 0.96 g/cm³
Melt Flow Index (190 °C / 2.16 kg)	1 – 10 g/10 min (grade dependent)
Moisture content	≤ 0.05 %

Recommended dosage

1.0 – 3.0 % for WPC; 2.0 – 5.0 % for biopolymer blends.

Processing temperature

170 – 220 °C

Packaging

25 kg multi-wall poly-woven bag with PE inner liner, 1000 kg FIBC, or 25 MT FCL bulk.

Shelf life

24 months from production date in unopened original packaging.

Storage

Store dry below 35 °C, away from direct sunlight, ignition sources and incompatible chemicals.

Target Applications

Wood-plastic composites (WPC) — decking, profiles
Natural-fiber reinforced polyolefins
Glass-fiber coupled PP / PE compounds
PLA / PBAT / starch biodegradable blends

Key Features

Molecular bridge between polar and non-polar phases
Improves tensile and flexural strength by 30 – 80 %
Reduces water uptake in WPC
Low odor, low color shift

Safety Data Sheet · GHS / OSHA HazCom / WHMIS 2015

SDS · WPC-UltraBond 90

Signal word

Not classified

Not classified as hazardous under OSHA HazCom 2012 / GHS / WHMIS 2015.

§ 1Identification

▾

Product code: WPC-UltraBond 90
Product name: WPC Coupling Agent — Maleic-Anhydride-Grafted Polyolefin (WPC-UltraBond 90)
Product use: Industrial raw material — Building & Construction, Automotive Moldings.
Restrictions: Industrial use only. Not for direct consumer sale unless explicitly labelled food/feed grade.
Supplier: Allzone Trading Corp.
Address: Ontario, Canada
Technical contact: technical@allzonetrading.ca · +1 (437) 297-6255
Emergency: CHEMTREC +1 800 424 9300 / CANUTEC +1 613 996 6666

§ 2Hazards Identification

▾

GHS classification: Not classified as hazardous under OSHA HazCom 2012 / GHS / WHMIS 2015.
Signal word: Not classified
Pictograms: None required.
Hazard statements: No GHS hazard statements apply to this article in supplied form.
Precautionary statements: P210 Keep away from heat, sparks, open flames and hot surfaces.

§ 3Composition / Information on Ingredients

▾

Mixture: Engineered polypropylene based wpc coupling agent — maleic-anhydride-grafted polyolefin (wpc-ultrabond 90).
Carrier: MA-Grafted PE/PP + Amide-Wax Lubricants | Advanced Polymer Alloys & WPC Modifiers | Additives

§ 4First Aid Measures

▾

Inhalation: Move to fresh air. Get medical advice if discomfort persists.
Skin contact: Wash with soap and water. Get medical advice if irritation persists.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do.
Ingestion: Rinse mouth. Do not induce vomiting. Seek medical advice if discomfort persists.
Hot melt burns: For pellet-form products processed at melt temperature: cool affected area with cold water. Do NOT peel solidified polymer from skin — seek medical attention.

§ 5Fire-Fighting Measures

▾

Suitable extinguishing media: Water spray, dry chemical, CO2, foam.
Unsuitable media: None known.
Special hazards: Combustion may produce CO, CO2 and dense black smoke. Polymer melt drips during fire.
PPE for firefighters: Self-contained breathing apparatus (SCBA) and full protective gear.

§ 6Accidental Release Measures

▾

Personal precautions: Wear PPE per Section 8. Avoid generating dust. Ventilate area.
Environmental precautions: Prevent entry into drains, waterways or soil. Notify authorities if significant release.
Cleanup: Sweep or vacuum spilled material into labelled container for recycling or disposal.

§ 7Handling & Storage

▾

Handling: Handle in well-ventilated areas. Avoid generating dust. Use appropriate PPE.
Storage: Store dry below 35 °C, away from direct sunlight and ignition sources.
Incompatible materials: Strong oxidizers.

§ 8Exposure Controls / Personal Protection

▾

Engineering controls: Local exhaust ventilation at material transfer and melt-processing points. Maintain dust below regional OEL.
Respiratory protection: Dust mask if fines / dust generated.
Hand protection: Heat-resistant gloves when handling molten polymer; cotton gloves for cold pellets.
Eye protection: Safety glasses with side shields; chemical splash goggles when handling powders or molten material.
Body protection: Long-sleeve work clothing. Full chemical apron for corrosive products.
Exposure limits: Follow nuisance-dust limits (10 mg/m³ total, 5 mg/m³ respirable).

§ 9Physical & Chemical Properties

▾

Physical state: Solid pellets / powder
Color: White / off-white / pre-colored
Odor: Odorless to faint polymer odor
pH (1 % solution): Not applicable (insoluble)
Melting / decomposition: Polymer melt 110 – 250 °C (matrix dependent)
Flash point: Not applicable (solid article)
Solubility (water): Insoluble
Density: 0.9 – 2.2 g/cm³ depending on grade

§ 10Stability & Reactivity

▾

Stability: Stable under normal storage and handling conditions.
Conditions to avoid: Excessive heat, ignition sources, prolonged UV exposure.
Hazardous decomposition products: CO, CO2, polymer fragment volatiles. Azodicarbonamide additionally releases NH3, N2.

§ 11Toxicological Information

▾

Acute oral toxicity (LD50, rat): Not classified (> 2000 mg/kg expected)
Skin irritation: Not classified for solid article in supplied form.
Eye irritation: Mechanical irritation possible from dust.
Respiratory sensitization: Not classified.
Carcinogenicity: Not classified.
Mutagenicity / reproductive tox.: No known effects based on current data.

§ 12Ecological Information

▾

Aquatic toxicity: Not classified — substance is essentially inert in water.
Persistence: Persistent in environment — polymer fragments are not readily biodegradable.
Bioaccumulation: No bioaccumulation potential expected.

§ 13Disposal Considerations

▾

Product disposal: Dispose in accordance with local, provincial, state and federal regulations. Recycle polymer fractions through certified plastic recyclers where possible.
Packaging disposal: Recycle empty bags / liners after thorough emptying.
Waste codes: Non-hazardous solid waste (EWC 07 02 13 typical).

§ 14Transport Information

▾

Status: Not regulated for transport under DOT / IATA / IMDG / ADR / TDG.

§ 15Regulatory Information

▾

REACH (EC 1907/2006): All components registered or exempt. No SVHC listed above 0.1 % w/w.
RoHS (EU 2011/65): Heavy metals < 1000 ppm (Pb, Hg, Cr⁶⁺) and < 100 ppm (Cd).
Food contact: Not intended for food-contact applications.
WHMIS 2015 (Canada): Not classified as a hazardous product.
TSCA / DSL: All substances listed on US TSCA and Canadian DSL inventories.

§ 16Other Information

▾

Revision: Rev. 2026-06-15 (representative industry-standard datasheet).
Disclaimer: Information provided in good faith based on current knowledge. No warranty expressed or implied. User is responsible for verifying suitability for end use and compliance with local regulations.
Document: SDS for WPC-UltraBond 90

This SDS is provided as representative industry-standard guidance. For project-specific binding documentation, please request the formal current revision via the technical contact above.

Technical knowledge for WPC Coupling Agent — Maleic-Anhydride-Grafted Polyolefin (WPC-UltraBond 90)

Engineering and purchasing guidance written for this material — understand it, apply it, compare options, specify a grade, and fix production problems.

Application Guides

Anti-Scratch Additives for PP and Automotive Interior Plastics

Comparison Articles

Compatibilizers for PP, PE and Recycled Blends

Buying Guides

Troubleshooting Guides

Migratory vs Permanent Anti-Static — Which One Your Part Actually Needs

Browse the full Knowledge Center →

Need help sourcing this product?

Send us your product name, quantity, application, destination, and required documents. We will review your request and help compare available supply options.

Submit RFQ Contact Allzone

Pricing and availability depend on quantity, destination, supplier confirmation and market conditions.

Continue the buyer journey — related grades, industry solutions, bulk supply, engineering tools and technical documents.

Industry & regional solutions

Bulk & container-direct supply

Continue learning

Engineering tools & documents

Ready to move forward? Send an RFQ — we usually acknowledge enquiries within one business day.

Products Get Quote Call