Applications
Where it is used
- Packaging film where dust pick-up or web handling is a problem
- Electronics trays and containers with a specified resistivity range
- Injection-moulded parts requiring stable long-term performance
Back to products
A-AS3090Category D
Permanent Anti-Static Masterbatch
Permanently dissipates static charges to prevent dust accumulation and shocks regardless of atmospheric humidity.
Polyethylene RoHS TDS
Logistics & Documentation
Plastic-Pallet Option · Import Documentation Support
- Lead Time: Depends on supplier availability, production schedule, shipping route and destination. Lead time and dispatch are confirmed with each quotation rather than published as a fixed figure.
- Packaging Option: Injection-molded plastic pallets available on request as an alternative to wooden pallets, subject to supplier capability and order size.
- Documentation Support: Import documentation support available. Available documents may include TDS, SDS, COA, origin documents and compliance declarations where applicable.
Additive identity
Values below are taken from the product record or the supplier technical data sheet held on file. Anything not shown here is confirmed in writing at quotation.
- Delivery form
- Masterbatch
- Compatible polymers
- Polyethylene
- Regulatory status
- RoHS
Additive family
Permanent Anti-Static Masterbatch is supplied under this additive family — compare the full family before fixing on a grade.
Technical & commercial reference
Antistatic masterbatch — how buyers specify and compare offers
Antistatic performance is a measured surface property under stated humidity. Permanent (polymeric) and migratory (internal) systems solve different problems and are not interchangeable.
Selection
How the right grade is chosen
- Permanent polymeric systems hold performance in dry air; migratory additives depend on humidity and bloom rate
- Required surface resistivity range and the test standard used to verify it
- Time to reach performance after moulding or extrusion
- Effect on printability, sealing and optical properties
Specification
What to state in the enquiry
- Target surface resistivity with the test standard and conditioning humidity stated
- Additive type (permanent / migratory) and active content
- Carrier resin and recommended let-down ratio
- Any food-contact documentation required for the finished article
Procurement
Sourcing considerations
- State the resistivity target, the polymer and the ambient humidity of the end use
- Request the TDS of the offered grade with dosage and test data
- Verify performance on the plant's own part geometry before qualification
- Grade, specification, documentation, packaging, availability and delivery terms are confirmed against supplier documentation with each quotation.
Comparison
Comparing competing offers
- Resistivity measured under the same standard and conditioning
- Performance stability over time and after washing or handling
- Effect on downstream printing and sealing operations
General industry guidance. Grade, specification, documentation, packaging and delivery terms for Permanent Anti-Static Masterbatch are confirmed against supplier documentation with each quotation. Request a quotation.
About this product
Permanent Anti-Static Masterbatch — product overview
A-AS3090 is a permanent anti-static masterbatch for polyolefin film and wire & cable applications. Unlike migratory anti-stats, which rely on humidity to work, the permanent chemistry retains its charge-dissipation performance regardless of ambient humidity — important for winter conditions across the Canadian market and for cleanroom / electronic-packaging applications. Base resin, film thickness and the presence of slip / anti-block co-additives all affect the effective surface resistivity delivered on the finished part; the buyer's dry-blend and processing conditions should be validated on trial batches. Grade options and letdown range are confirmed at RFQ.
Document & COA status
- • TDS: Displayed properties are an Allzone technical reference; manufacturer documentation is available on request.
- • SDS: Safety data is subject to grade and supplier confirmation. One SDS does not necessarily apply to every grade or supplier.
- • COA: Certificate of Analysis is provided against the confirmed shipment, grade and batch. No stock, lead-time or regulatory claim is implied without written confirmation.
Technical Data Sheet
TDS · A-AS3090
Product form
Pellets (cylindrical, 2–4 mm)
Appearance
White
Carrier / matrix
Polyethylene compatible base resin
Key Physical & Chemical Properties
| Active ingredient | 20 – 40 % concentrate |
|---|---|
| Bulk density | 0.95 – 1.10 g/cm³ |
| Melt Flow Index (190 °C / 2.16 kg) | 5 – 12 g/10 min |
| Moisture content | ≤ 0.10 % |
| Recommended let-down ratio | 1 : 50 to 1 : 200 |
Recommended dosage
0.5 – 3.0 % by weight depending on target performance.
Processing temperature
190 – 260 °C
Packaging
25 kg multi-wall poly-woven bag with PE inner liner, 1000 kg FIBC, or 25 MT FCL bulk.
Shelf life
24 months from production date in unopened original packaging.
Storage
Store dry below 35 °C, away from direct sunlight, ignition sources and incompatible chemicals.
Target Applications
- Blown / cast film and lamination
- Injection molding of automotive and consumer parts
- Pipe, sheet, and profile extrusion
- Wire & cable jacketing where applicable
Key Features
- Long-lasting performance with low dosage
- Compatible with most polyolefin and engineering resins
- Excellent dispersion — no agglomerates
- REACH-registered active components
Safety Data Sheet · GHS / OSHA HazCom / WHMIS 2015
SDS · A-AS3090
Signal word
Not classified
Not classified as hazardous under OSHA HazCom 2012 / GHS / WHMIS 2015.
§ 1Identification▾
- Product code
- A-AS3090
- Product name
- Permanent Anti-Static Masterbatch
- Product use
- Industrial raw material — Blown Film Packaging, Wire & Cable.
- Restrictions
- Industrial use only. Not for direct consumer sale unless explicitly labelled food/feed grade.
- Supplier
- Allzone Trading Corp.
- Address
- Ontario, Canada
- Technical contact
- technical@allzonetrading.ca · +1 (437) 297-6255
- Emergency
- CHEMTREC +1 800 424 9300 / CANUTEC +1 613 996 6666
§ 2Hazards Identification▾
- GHS classification
- Not classified as hazardous under OSHA HazCom 2012 / GHS / WHMIS 2015.
- Signal word
- Not classified
- Pictograms
- None required.
- Hazard statements
- No GHS hazard statements apply to this article in supplied form.
- Precautionary statements
- P210 Keep away from heat, sparks, open flames and hot surfaces.
§ 3Composition / Information on Ingredients▾
- Mixture
- Engineered polyethylene based permanent anti-static masterbatch.
- Carrier
- Polyethylene compatible polymer.
§ 4First Aid Measures▾
- Inhalation
- Move to fresh air. Get medical advice if discomfort persists.
- Skin contact
- Wash with soap and water. Get medical advice if irritation persists.
- Eye contact
- Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do.
- Ingestion
- Rinse mouth. Do not induce vomiting. Seek medical advice if discomfort persists.
- Hot melt burns
- For pellet-form products processed at melt temperature: cool affected area with cold water. Do NOT peel solidified polymer from skin — seek medical attention.
§ 5Fire-Fighting Measures▾
- Suitable extinguishing media
- Water spray, dry chemical, CO2, foam.
- Unsuitable media
- None known.
- Special hazards
- Combustion may produce CO, CO2 and dense black smoke. Polymer melt drips during fire.
- PPE for firefighters
- Self-contained breathing apparatus (SCBA) and full protective gear.
§ 6Accidental Release Measures▾
- Personal precautions
- Wear PPE per Section 8. Avoid generating dust. Ventilate area.
- Environmental precautions
- Prevent entry into drains, waterways or soil. Notify authorities if significant release.
- Cleanup
- Sweep or vacuum spilled material into labelled container for recycling or disposal.
§ 7Handling & Storage▾
- Handling
- Handle in well-ventilated areas. Avoid generating dust. Use appropriate PPE.
- Storage
- Store dry below 35 °C, away from direct sunlight and ignition sources.
- Incompatible materials
- Strong oxidizers.
§ 8Exposure Controls / Personal Protection▾
- Engineering controls
- Local exhaust ventilation at material transfer and melt-processing points. Maintain dust below regional OEL.
- Respiratory protection
- Dust mask if fines / dust generated.
- Hand protection
- Heat-resistant gloves when handling molten polymer; cotton gloves for cold pellets.
- Eye protection
- Safety glasses with side shields; chemical splash goggles when handling powders or molten material.
- Body protection
- Long-sleeve work clothing. Full chemical apron for corrosive products.
- Exposure limits
- Follow nuisance-dust limits (10 mg/m³ total, 5 mg/m³ respirable).
§ 9Physical & Chemical Properties▾
- Physical state
- Solid pellets / powder
- Color
- White / off-white / pre-colored
- Odor
- Odorless to faint polymer odor
- pH (1 % solution)
- Not applicable (insoluble)
- Melting / decomposition
- Polymer melt 110 – 250 °C (matrix dependent)
- Flash point
- Not applicable (solid article)
- Solubility (water)
- Insoluble
- Density
- 0.9 – 2.2 g/cm³ depending on grade
§ 10Stability & Reactivity▾
- Stability
- Stable under normal storage and handling conditions.
- Conditions to avoid
- Excessive heat, ignition sources, prolonged UV exposure.
- Hazardous decomposition products
- CO, CO2, polymer fragment volatiles. Azodicarbonamide additionally releases NH3, N2.
§ 11Toxicological Information▾
- Acute oral toxicity (LD50, rat)
- Not classified (> 2000 mg/kg expected)
- Skin irritation
- Not classified for solid article in supplied form.
- Eye irritation
- Mechanical irritation possible from dust.
- Respiratory sensitization
- Not classified.
- Carcinogenicity
- Not classified.
- Mutagenicity / reproductive tox.
- No known effects based on current data.
§ 12Ecological Information▾
- Aquatic toxicity
- Not classified — substance is essentially inert in water.
- Persistence
- Persistent in environment — polymer fragments are not readily biodegradable.
- Bioaccumulation
- No bioaccumulation potential expected.
§ 13Disposal Considerations▾
- Product disposal
- Dispose in accordance with local, provincial, state and federal regulations. Recycle polymer fractions through certified plastic recyclers where possible.
- Packaging disposal
- Recycle empty bags / liners after thorough emptying.
- Waste codes
- Non-hazardous solid waste (EWC 07 02 13 typical).
§ 14Transport Information▾
- Status
- Not regulated for transport under DOT / IATA / IMDG / ADR / TDG.
§ 15Regulatory Information▾
- REACH (EC 1907/2006)
- All components registered or exempt. No SVHC listed above 0.1 % w/w.
- RoHS (EU 2011/65)
- Heavy metals < 1000 ppm (Pb, Hg, Cr⁶⁺) and < 100 ppm (Cd).
- Food contact
- Not intended for food-contact applications.
- WHMIS 2015 (Canada)
- Not classified as a hazardous product.
- TSCA / DSL
- All substances listed on US TSCA and Canadian DSL inventories.
§ 16Other Information▾
- Revision
- Rev. 2026-06-15 (representative industry-standard datasheet).
- Disclaimer
- Information provided in good faith based on current knowledge. No warranty expressed or implied. User is responsible for verifying suitability for end use and compliance with local regulations.
- Document
- SDS for A-AS3090
This SDS is provided as representative industry-standard guidance. For project-specific binding documentation, please request the formal current revision via the technical contact above.
Technical knowledge for Permanent Anti-Static Masterbatch
Engineering and purchasing guidance written for this material — understand it, apply it, compare options, specify a grade, and fix production problems.
Application Guides
Comparison Articles
Buying Guides
Related products
Materials commonly quoted alongside Permanent Anti-Static Masterbatch by the same plants.
Polymer & Plastics
Anti-Block and Slip Additive Masterbatch
Polymer masterbatch — lowers COF without interfering with corona treatment or surface printing on high-speed film extrusion lines.
A-FAKK0121
Polymer & Plastics
Anti-Static Additives
Packaging film for electronics
Industrial / plastics manufacturing
Polymer & Plastics
Slip Additives
Reducing coefficient of friction in film
Industrial / plastics manufacturing
Polymer & Plastics
Thermal Anti-Oxidants & Process Stabilizers
Heat stabiliser — stops thermo-oxidative degradation during processing.
A-OX
Sourcing Support
Need help sourcing this product?
Send us your product name, quantity, application, destination, and required documents. We will review your request and help compare available supply options.
Pricing and availability depend on quantity, destination, supplier confirmation and market conditions.
Continue the buyer journey — related grades, industry solutions, bulk supply, engineering tools and technical documents.
Industry & regional solutions
Bulk & container-direct supply
Continue learning
Engineering tools & documents
Ready to move forward? Send an RFQ — we usually acknowledge enquiries within one business day.