Allzone Trading Corp. — Sourcing. Supplying. Solutions.
RFQ
Back to products
CMB-368CCategory B

Color Masterbatch — Pantone 368C (Bright Green)

High-concentration green color masterbatch matched to Pantone 368C. Engineered on a filler-free virgin carrier for clean tone, consistent dispersion and stable performance in film, injection and blow molding.

Polyethylene RoHS REACH TDS
View TDS View SDS Request Full TDS

Logistics & Documentation

Plastic-Pallet Option · Import Documentation Support

  • Lead Time: Depends on supplier stock, production schedule, shipping route and destination. GTA dispatch typically targets 24–48 hours on confirmed stock items.
  • Packaging Option: Injection-molded plastic pallets available on request as an alternative to wooden pallets, subject to supplier capability and order size.
  • Documentation Support: Import documentation support available. Available documents may include TDS, SDS, COA, origin documents and compliance declarations where applicable.

Colour identity

#78BE20
Standard shadePANTONE 368 C
Bright Green

Standard shade held as a repeatable formulation; supplier TDS states the Pantone reference.

On-screen colour is an approximation. The Pantone code — not the screen — is the authoritative reference on a production order.

Browse the Pantone reference

Verified data

Only values printed on the supplier technical documents or recorded against this product are shown. Anything absent is confirmed at quotation rather than estimated here.

Carrier & host polymer compatibility
PolymerStated asSource
PPCarrier stated on product recordProduct record
PECarrier stated on product recordProduct record

Polymers not listed are not claimed. Compatibility with your own resin grade and line is confirmed on trial.

Color Masterbatch — Pantone 368C (Bright Green) — category illustration
Category illustration — actual product appearance may vary by grade and batch.

About this product

Color Masterbatch — Pantone 368C (Bright Green) — product overview

CMB-368C is a bright-green colour masterbatch matched to Pantone 368C on a virgin filler-free PE/PP carrier. Green shades in this hue family are typically achieved by a blend of yellow and blue pigments and are sensitive to pigment ratio drift across batches; the filler-free virgin formulation supports reproducible tone across production runs. Downstream applications include packaging film, injection and blow-moulded consumer goods. Regulatory scope and any food-contact confirmation are stated per shipment at RFQ.

Document & COA status
  • • TDS: Displayed properties are an Allzone technical reference; manufacturer documentation is available on request.
  • • SDS: Safety data is subject to grade and supplier confirmation. One SDS does not necessarily apply to every grade or supplier.
  • • COA: Certificate of Analysis is provided against the confirmed shipment, grade and batch. No stock, lead-time or regulatory claim is implied without written confirmation.

Technical Data Sheet

TDS · CMB-368C

Product form

Pellets (cylindrical, 2–4 mm)

Appearance

Solid color pellets — Pantone / RAL matched

Carrier / matrix

PE/PP Matrix | High concentration, filler-free virgin resin

Key Physical & Chemical Properties

Pigment content20 – 40 % (depending on shade)
Bulk density0.95 – 1.15 g/cm³
Melt Flow Index (190 °C / 2.16 kg)10 – 20 g/10 min
Heat stabilityStable to 280 °C / 5 min residence
Light fastness (ISO 105 B02)7 – 8 / 8 (Blue Wool)
Heavy metalsCd / Pb / Hg / Cr⁶⁺ free

Recommended dosage

1.0 – 4.0 % to reach target Pantone shade.

Processing temperature

180 – 260 °C

Packaging

25 kg multi-wall poly-woven bag with PE inner liner, 1000 kg FIBC, or 25 MT FCL bulk.

Shelf life

24 months from production date in unopened original packaging.

Storage

Store dry below 35 °C, away from direct sunlight, ignition sources and incompatible chemicals.

Target Applications

  • Pantone-matched film and bag production
  • Injection-molded consumer goods
  • Automotive interior trim coloring
  • PET bottle pre-form coloration

Key Features

  • Pantone / RAL / spectrometry color matching to ΔE < 1.0
  • Heavy-metal-free pigment system (REACH SVHC compliant)
  • Compatible with PE, PP, PET, PS, ABS, SAN, PVC
  • Combo formulations (Color + UV / AS / FR) available on request

Safety Data Sheet · GHS / OSHA HazCom / WHMIS 2015

SDS · CMB-368C

Signal word

Not classified

Not classified as hazardous under OSHA HazCom 2012 / GHS / WHMIS 2015.

§ 1Identification
▾
Product code
CMB-368C
Product name
Color Masterbatch — Pantone 368C (Bright Green)
Product use
Industrial raw material — Blown Film Packaging, Automotive Moldings.
Restrictions
Industrial use only. Not for direct consumer sale unless explicitly labelled food/feed grade.
Supplier
Allzone Trading Corp.
Address
Ontario, Canada
Technical contact
technical@allzonetrading.ca · +1 (437) 297-6255
Emergency
CHEMTREC +1 800 424 9300 / CANUTEC +1 613 996 6666
§ 2Hazards Identification
▾
GHS classification
Not classified as hazardous under OSHA HazCom 2012 / GHS / WHMIS 2015.
Signal word
Not classified
Pictograms
None required.
Hazard statements
No GHS hazard statements apply to this article in supplied form.
Precautionary statements
P210 Keep away from heat, sparks, open flames and hot surfaces.
§ 3Composition / Information on Ingredients
▾
Mixture
Engineered polyethylene based color masterbatch — pantone 368c (bright green).
Carrier
PE/PP Matrix | High concentration, filler-free virgin resin
§ 4First Aid Measures
▾
Inhalation
Move to fresh air. Get medical advice if discomfort persists.
Skin contact
Wash with soap and water. Get medical advice if irritation persists.
Eye contact
Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do.
Ingestion
Rinse mouth. Do not induce vomiting. Seek medical advice if discomfort persists.
Hot melt burns
For pellet-form products processed at melt temperature: cool affected area with cold water. Do NOT peel solidified polymer from skin — seek medical attention.
§ 5Fire-Fighting Measures
▾
Suitable extinguishing media
Water spray, dry chemical, CO2, foam.
Unsuitable media
None known.
Special hazards
Combustion may produce CO, CO2 and dense black smoke. Polymer melt drips during fire.
PPE for firefighters
Self-contained breathing apparatus (SCBA) and full protective gear.
§ 6Accidental Release Measures
▾
Personal precautions
Wear PPE per Section 8. Avoid generating dust. Ventilate area.
Environmental precautions
Prevent entry into drains, waterways or soil. Notify authorities if significant release.
Cleanup
Sweep or vacuum spilled material into labelled container for recycling or disposal.
§ 7Handling & Storage
▾
Handling
Handle in well-ventilated areas. Avoid generating dust. Use appropriate PPE.
Storage
Store dry below 35 °C, away from direct sunlight and ignition sources.
Incompatible materials
Strong oxidizers.
§ 8Exposure Controls / Personal Protection
▾
Engineering controls
Local exhaust ventilation at material transfer and melt-processing points. Maintain dust below regional OEL.
Respiratory protection
Dust mask if fines / dust generated.
Hand protection
Heat-resistant gloves when handling molten polymer; cotton gloves for cold pellets.
Eye protection
Safety glasses with side shields; chemical splash goggles when handling powders or molten material.
Body protection
Long-sleeve work clothing. Full chemical apron for corrosive products.
Exposure limits
Follow nuisance-dust limits (10 mg/m³ total, 5 mg/m³ respirable).
§ 9Physical & Chemical Properties
▾
Physical state
Solid pellets / powder
Color
White / off-white / pre-colored
Odor
Odorless to faint polymer odor
pH (1 % solution)
Not applicable (insoluble)
Melting / decomposition
Polymer melt 110 – 250 °C (matrix dependent)
Flash point
Not applicable (solid article)
Solubility (water)
Insoluble
Density
0.9 – 2.2 g/cm³ depending on grade
§ 10Stability & Reactivity
▾
Stability
Stable under normal storage and handling conditions.
Conditions to avoid
Excessive heat, ignition sources, prolonged UV exposure.
Hazardous decomposition products
CO, CO2, polymer fragment volatiles. Azodicarbonamide additionally releases NH3, N2.
§ 11Toxicological Information
▾
Acute oral toxicity (LD50, rat)
Not classified (> 2000 mg/kg expected)
Skin irritation
Not classified for solid article in supplied form.
Eye irritation
Mechanical irritation possible from dust.
Respiratory sensitization
Not classified.
Carcinogenicity
Not classified.
Mutagenicity / reproductive tox.
No known effects based on current data.
§ 12Ecological Information
▾
Aquatic toxicity
Not classified — substance is essentially inert in water.
Persistence
Persistent in environment — polymer fragments are not readily biodegradable.
Bioaccumulation
No bioaccumulation potential expected.
§ 13Disposal Considerations
▾
Product disposal
Dispose in accordance with local, provincial, state and federal regulations. Recycle polymer fractions through certified plastic recyclers where possible.
Packaging disposal
Recycle empty bags / liners after thorough emptying.
Waste codes
Non-hazardous solid waste (EWC 07 02 13 typical).
§ 14Transport Information
▾
Status
Not regulated for transport under DOT / IATA / IMDG / ADR / TDG.
§ 15Regulatory Information
▾
REACH (EC 1907/2006)
All components registered or exempt. No SVHC listed above 0.1 % w/w.
RoHS (EU 2011/65)
Heavy metals < 1000 ppm (Pb, Hg, Cr⁶⁺) and < 100 ppm (Cd).
Food contact
Not intended for food-contact applications.
WHMIS 2015 (Canada)
Not classified as a hazardous product.
TSCA / DSL
All substances listed on US TSCA and Canadian DSL inventories.
§ 16Other Information
▾
Revision
Rev. 2026-06-15 (representative industry-standard datasheet).
Disclaimer
Information provided in good faith based on current knowledge. No warranty expressed or implied. User is responsible for verifying suitability for end use and compliance with local regulations.
Document
SDS for CMB-368C

This SDS is provided as representative industry-standard guidance. For project-specific binding documentation, please request the formal current revision via the technical contact above.

Technical knowledge for Color Masterbatch — Pantone 368C (Bright Green)

Engineering and purchasing guidance written for this material — understand it, apply it, compare options, specify a grade, and fix production problems.

Foundation Articles

Application Guides

Comparison Articles

Buying Guides

Troubleshooting Guides

Browse the full Knowledge Center →

Related products

Materials commonly quoted alongside Color Masterbatch — Pantone 368C (Bright Green) by the same plants.

Color Masterbatch Series — Pantone-Matched Standard Palette

Polymer masterbatch — heavy-metal-free, high thermal stability pigments mapped precisely to Pantone standards.

Polymer & PlasticsC-Series
View Product

Color Masterbatch — Pantone 102C (Vivid Yellow)

Polymer masterbatch — high-concentration yellow color masterbatch matched to Pantone 102C.

Polymer & PlasticsCMB-102C
View Product

Color Masterbatch — Pantone 286C (Deep Blue)

Polymer masterbatch — high-concentration deep blue color masterbatch matched to Pantone 286C.

Polymer & PlasticsCMB-286C
View Product

Color Masterbatch — Pantone 485C (Pure Red)

Polymer masterbatch — high-concentration red color masterbatch matched to Pantone 485C.

Polymer & PlasticsCMB-485C
View Product

Sourcing Support

Need help sourcing this product?

Send us your product name, quantity, application, destination, and required documents. We will review your request and help compare available supply options.

Submit RFQContact Allzone

Pricing and availability depend on quantity, destination, supplier confirmation and market conditions.

Continue the buyer journey — related grades, industry solutions, bulk supply, engineering tools and technical documents.

Industry & regional solutions

Bulk & container-direct supply

Continue learning

Engineering tools & documents

Ready to move forward? Send an RFQ — we usually acknowledge enquiries within one business day.
ProductsGet QuoteCall