Plastic Spacers & Standoffs — Assembly Spacing Components
Allzone Trading supplies plastic spacers and standoffs to electronics assemblers, panel builders and equipment OEMs in Ontario, Quebec and across Canada. Length, thread, bore and material differ by programme and are confirmed against supplier technical data at quotation.
At a glance
- Product
- Plastic Spacers & Standoffs
- Grades
- Assembly Spacing Components
- Typical applications
- PCB and control board mounting · Electrical panel and enclosure assembly · Sensor and instrument builds
- Packaging
- Packaging confirmed at quotation
- • Certificate of Analysis is provided against the confirmed shipment, grade and batch.
- • Manufacturer TDS and SDS are subject to grade and supplier confirmation and are available on request.
- • Grades, packaging and origin above are indicative sourcing options and are confirmed at quotation.
Available grades from container-direct sourcing
Assembly Spacing Components
Dimensions, material and connection detail confirmed against supplier technical data at quotation.
Typical applications
- PCB and control board mounting
- Electrical panel and enclosure assembly
- Sensor and instrument builds
- Machine guard and cover spacing
- General OEM sub-assembly
Why Canadian buyers choose us
- Component enquiries handled against your drawing, sample or existing part reference
- Material, dimensions, thread and connection detail confirmed in writing before order confirmation
- Supplier technical drawing and material declaration provided for the exact part offered
- LTL and FTL freight to manufacturers, packers and OEMs across Ontario, Quebec and Western Canada
- Quantities reviewed per enquiry, from trial cartons to full container loads
Typical industries served
Technical & procurement detail
What plastic spacers & standoffs do+
A spacer sets and holds a gap. In an electronic assembly it keeps a board off a metal chassis so nothing shorts and air can move; in a mechanical assembly it takes up a stack height so the fastener clamps where the designer intended. Because the part is insulating, one component solves both the spacing and the isolation problem.
Common types within this family+
This page covers the family as a whole: round unthreaded spacers, hex male-female threaded standoffs, female-female threaded standoffs, snap-in and push-in PCB supports, square and shouldered spacers. Individual sizes, threads, colours and geometries are quoted from your specification rather than listed as separate products.
Material options+
Spacers are commonly moulded in nylon 6/6 or polypropylene in natural white or black, with brass or moulded threads where a threaded standoff is required. Material and thread form are confirmed with the supplier for your part.
Selection considerations+
Fix the stack height first — board thickness, clearance beneath and any component that protrudes — because that is the dimension the assembly actually needs. Then decide whether the standoff must be threaded or can be a plain barrel over a through-bolt, and whether the board is fastened or snapped, since a snap-in support removes two screws per corner from the assembly line.
What to include in your enquiry+
Send the spacer length or standoff height, the bore or thread size, male-female or female-female configuration, the material and colour, and the annual or per-order quantity per size.
Documentation and specification+
Allzone confirms material, dimensions and connection detail with the supplier before quoting, and shares the technical drawing and material declaration for the exact part offered. No dimension, pressure rating, material approval or certification is assumed on this page — every value is verified against supplier documentation at quotation.
Frequently asked questions
What is the difference between a spacer and a standoff?+
A spacer is an unthreaded barrel that a screw passes through. A standoff carries its own thread at one or both ends, so it fastens directly.
Can snap-in supports replace screwed standoffs?+
Often, where the board is not carrying load and service access is acceptable. It depends on the board weight, hole size and panel thickness, which are reviewed per assembly.
Can you quote against a drawing or a sample part?+
Yes. A drawing, a photograph or an existing part reference is usually the fastest route to an accurate quotation for a moulded component.
What quantities are quoted?+
Quantities are reviewed per enquiry. Moulded components are normally quoted per carton or per container load depending on the part and the programme.
Are certifications available?+
Any certification, approval or rating is confirmed for the specific supplier and part at quotation. Nothing is claimed on this page in advance.
Technical knowledge for Plastic Spacers & Standoffs Supplier — Canada
Engineering and purchasing guidance written for this material — understand it, apply it, compare options, specify a grade, and fix production problems.
Foundation Articles
Application Guides
Comparison Articles
Buying Guides
Related products
Materials commonly quoted alongside Plastic Spacers & Standoffs by the same plants.
Plastic Shims
Window and door frame installation
Nylon Wall Anchors
Fixing into concrete, block and brick
Insulation Fasteners
External wall insulation and EIFS systems
Plastic Rivets & Push-In Fasteners
Equipment panel and cover assembly
Need a quote on Plastic Spacers & Standoffs?
Request pricing, TDS/SDS and available documentation. We usually acknowledge enquiries within one business day; samples are subject to supplier availability and product classification.