Plastic Rivets & Push-In Fasteners — Panel Fastening Components
Allzone Trading supplies plastic rivets and push-in fasteners to equipment OEMs, vehicle upfitters and industrial distributors in Ontario, Quebec and across Canada. Hole size, grip range, head diameter and material differ by programme and are confirmed against supplier technical data at quotation.
At a glance
- Product
- Plastic Rivets & Push-In Fasteners
- Grades
- Panel Fastening Components
- Typical applications
- Equipment panel and cover assembly · Vehicle trim and interior panels · Appliance and electronics housings
- Packaging
- Packaging confirmed at quotation
- • Certificate of Analysis is provided against the confirmed shipment, grade and batch.
- • Manufacturer TDS and SDS are subject to grade and supplier confirmation and are available on request.
- • Grades, packaging and origin above are indicative sourcing options and are confirmed at quotation.
Available grades from container-direct sourcing
Panel Fastening Components
Dimensions, material and connection detail confirmed against supplier technical data at quotation.
Typical applications
- Equipment panel and cover assembly
- Vehicle trim and interior panels
- Appliance and electronics housings
- Signage and display assembly
- Guard and shroud fastening
Why Canadian buyers choose us
- Component enquiries handled against your drawing, sample or existing part reference
- Material, dimensions, thread and connection detail confirmed in writing before order confirmation
- Supplier technical drawing and material declaration provided for the exact part offered
- LTL and FTL freight to manufacturers, packers and OEMs across Ontario, Quebec and Western Canada
- Quantities reviewed per enquiry, from trial cartons to full container loads
Typical industries served
Technical & procurement detail
What plastic rivets & push-in fasteners do+
A push-in fastener replaces a screw and a driver with a thumb. The centre pin drives down and splays the legs behind the panel, locking two sheets together in a second — which is why these parts show up wherever assembly time per unit is the cost that matters, and why grip range is the specification that decides whether they hold.
Common types within this family+
This page covers the family as a whole: expansion rivets with drive pin, push pin retainers, ratchet and screw-style rivets, trim and moulding clips, reusable removable rivets. Individual sizes, threads, colours and geometries are quoted from your specification rather than listed as separate products.
Material options+
Fasteners are commonly moulded in nylon 6/6 or polyacetal, in black or natural. Material choice affects flexibility and repeated-use behaviour and is confirmed with the supplier for the application.
Selection considerations+
Measure the hole diameter and the total panel thickness the fastener has to clamp, because grip range is what fails first when a part is substituted. Then decide whether the joint must come apart again in service, since a reusable rivet and a one-way rivet look similar and behave very differently at the first repair.
What to include in your enquiry+
Send the hole diameter, the total panel thickness or grip range, the head diameter required, whether the fastener must be removable, the colour and material, and the quantity per size.
Documentation and specification+
Allzone confirms material, dimensions and connection detail with the supplier before quoting, and shares the technical drawing and material declaration for the exact part offered. No dimension, pressure rating, material approval or certification is assumed on this page — every value is verified against supplier documentation at quotation.
Frequently asked questions
Can plastic rivets be removed and reused?+
Some designs are made to be prised out and re-set; others deform on removal. Whether a given rivet is reusable is confirmed per part at quotation.
What holds the fastener in place?+
The legs splay behind the panel as the centre pin is driven home, clamping the sheets within the fastener's grip range. Outside that range the joint will be loose or will not seat.
Can you quote against a drawing or a sample part?+
Yes. A drawing, a photograph or an existing part reference is usually the fastest route to an accurate quotation for a moulded component.
What quantities are quoted?+
Quantities are reviewed per enquiry. Moulded components are normally quoted per carton or per container load depending on the part and the programme.
Are certifications available?+
Any certification, approval or rating is confirmed for the specific supplier and part at quotation. Nothing is claimed on this page in advance.
Technical knowledge for Plastic Rivets & Push-In Panel Fasteners — Canada
Engineering and purchasing guidance written for this material — understand it, apply it, compare options, specify a grade, and fix production problems.
Foundation Articles
Application Guides
Comparison Articles
Buying Guides
Related products
Materials commonly quoted alongside Plastic Rivets & Push-In Fasteners by the same plants.
Plastic Shims
Window and door frame installation
Nylon Wall Anchors
Fixing into concrete, block and brick
Plastic Spacers & Standoffs
PCB and control board mounting
Insulation Fasteners
External wall insulation and EIFS systems
Need a quote on Plastic Rivets & Push-In Fasteners?
Request pricing, TDS/SDS and available documentation. We usually acknowledge enquiries within one business day; samples are subject to supplier availability and product classification.