LUCategory E

PVC Internal and External Lubricants

Balanced metal-release and internal shear-heat reduction to prevent plate-out and scorching in flexible and rigid PVC compounds.

PVC / uPVC REACH TDS

View TDS View SDS Request Full TDS

Logistics & Documentation

Plastic-Pallet Option · Import Documentation Support

Lead Time: Depends on supplier stock, production schedule, shipping route and destination. GTA dispatch typically targets 24–48 hours on confirmed stock items.
Packaging Option: Injection-molded plastic pallets available on request as an alternative to wooden pallets, subject to supplier capability and order size.
Documentation Support: Import documentation support available. Available documents may include TDS, SDS, COA, origin documents and compliance declarations where applicable.

PVC identity

Values below are taken from the verified product record held on file. Dosage, processing window and active content are confirmed in writing against the supplier technical data sheet at quotation.

Product function: PVC lubricant system
PVC type: Rigid and flexible PVC compounds
Application: PVC compounding, calendering and extrusion
Delivery form: Internal and external lubricant supplied as a balanced system
Lubrication role: Balanced metal release (external) and internal shear-heat reduction
Plate-out behaviour: Formulated to reduce plate-out and scorching in the compound
Regulatory status: REACH
Source document: Canonical product record — LU (Allzone product master)

PVC family

PVC Internal and External Lubricants is supplied under this family:

PVC Lubricants

PVC Internal and External Lubricants — category illustration — Category illustration — actual product appearance may vary by grade and batch.

About this product

PVC Internal and External Lubricants — product overview

Category-E internal and external lubricants engineered for rigid and flexible PVC compounding. The role of these additives is to control metal release, reduce internal shear-heat build-up during high-output extrusion, and prevent plate-out on tooling — the two failure modes that most often force line stoppages in uPVC profile, pipe and sheet plants. Because PVC formulations vary widely between compounders (Ca-Zn vs Pb-Sb systems, filler load, impact-modifier package), specific product selection, addition rate and combination with the primary stabiliser must be confirmed against the target formulation. Allzone supplies grades on request and provides manufacturer TDS and SDS after the compound and target line are described.

Document & COA status

• TDS: Displayed properties are an Allzone technical reference; manufacturer documentation is available on request.
• SDS: Safety data is subject to grade and supplier confirmation. One SDS does not necessarily apply to every grade or supplier.
• COA: Certificate of Analysis is provided against the confirmed shipment, grade and batch. No stock, lead-time or regulatory claim is implied without written confirmation.

Technical Data Sheet

TDS · LU

Product form

Free-flowing fine powder / micro-pellets

Appearance

White to off-white

Carrier / matrix

PVC / uPVC compatible base resin

Specification confirmed at quotation

Dosage, processing window and physical properties for LU depend on the compound, the machine and the rest of the formulation, and no supplier technical data sheet is on file for this grade. Rather than publish assumed values, we confirm the specification in writing against the supplier technical data sheet and safety data sheet before an order is placed. Request the documents with your enquiry and describe your compound and process.

Packaging

25 kg multi-wall poly-woven bag with PE inner liner, 1000 kg FIBC, or 25 MT FCL bulk.

Shelf life

24 months from production date in unopened original packaging.

Storage

Store dry below 35 °C, away from direct sunlight, ignition sources and incompatible chemicals.

Target Applications

Rigid uPVC window and door profiles
PVC pipes, fittings, conduits
Wall cladding, decking and WPC
Cable insulation compounds

Key Features

100 % lead-free / cadmium-free formulation
Excellent initial color hold and long-term weatherability
Improves melt strength and corner-weld integrity
Compliant with EU 2015/628 (lead phase-out)

Safety Data Sheet · GHS / OSHA HazCom / WHMIS 2015

SDS · LU

Signal word

Not classified

Not classified as hazardous under OSHA HazCom 2012 / GHS / WHMIS 2015.

§ 1Identification

▾

Product code: LU
Product name: PVC Internal and External Lubricants
Product use: Industrial raw material — Building & Construction.
Restrictions: Industrial use only. Not for direct consumer sale unless explicitly labelled food/feed grade.
Supplier: Allzone Trading Corp.
Address: Ontario, Canada
Technical contact: technical@allzonetrading.ca · +1 (437) 297-6255
Emergency: CHEMTREC +1 800 424 9300 / CANUTEC +1 613 996 6666

§ 2Hazards Identification

▾

GHS classification: Not classified as hazardous under OSHA HazCom 2012 / GHS / WHMIS 2015.
Signal word: Not classified
Pictograms: None required.
Hazard statements: No GHS hazard statements apply to this article in supplied form.
Precautionary statements: P210 Keep away from heat, sparks, open flames and hot surfaces.

§ 3Composition / Information on Ingredients

▾

Mixture: Engineered pvc / upvc based pvc internal and external lubricants.
Carrier: PVC / uPVC compatible polymer.

§ 4First Aid Measures

▾

Inhalation: Move to fresh air. Get medical advice if discomfort persists.
Skin contact: Wash with soap and water. Get medical advice if irritation persists.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do.
Ingestion: Rinse mouth. Do not induce vomiting. Seek medical advice if discomfort persists.
Hot melt burns: For pellet-form products processed at melt temperature: cool affected area with cold water. Do NOT peel solidified polymer from skin — seek medical attention.

§ 5Fire-Fighting Measures

▾

Suitable extinguishing media: Water spray, dry chemical, CO2, foam.
Unsuitable media: None known.
Special hazards: Combustion may produce CO, CO2 and dense black smoke. Polymer melt drips during fire.
PPE for firefighters: Self-contained breathing apparatus (SCBA) and full protective gear.

§ 6Accidental Release Measures

▾

Personal precautions: Wear PPE per Section 8. Avoid generating dust. Ventilate area.
Environmental precautions: Prevent entry into drains, waterways or soil. Notify authorities if significant release.
Cleanup: Sweep or vacuum spilled material into labelled container for recycling or disposal.

§ 7Handling & Storage

▾

Handling: Handle in well-ventilated areas. Avoid generating dust. Use appropriate PPE.
Storage: Store dry below 35 °C, away from direct sunlight and ignition sources.
Incompatible materials: Strong oxidizers.

§ 8Exposure Controls / Personal Protection

▾

Engineering controls: Local exhaust ventilation at material transfer and melt-processing points. Maintain dust below regional OEL.
Respiratory protection: Dust mask if fines / dust generated.
Hand protection: Heat-resistant gloves when handling molten polymer; cotton gloves for cold pellets.
Eye protection: Safety glasses with side shields; chemical splash goggles when handling powders or molten material.
Body protection: Long-sleeve work clothing. Full chemical apron for corrosive products.
Exposure limits: Follow nuisance-dust limits (10 mg/m³ total, 5 mg/m³ respirable).

§ 9Physical & Chemical Properties

▾

Physical state: Solid pellets / powder
Color: White / off-white / pre-colored
Odor: Odorless to faint polymer odor
pH (1 % solution): Not applicable (insoluble)
Melting / decomposition: Polymer melt 110 – 250 °C (matrix dependent)
Flash point: Not applicable (solid article)
Solubility (water): Insoluble
Density: 0.9 – 2.2 g/cm³ depending on grade

§ 10Stability & Reactivity

▾

Stability: Stable under normal storage and handling conditions.
Conditions to avoid: Excessive heat, ignition sources, prolonged UV exposure.
Hazardous decomposition products: CO, CO2, polymer fragment volatiles. Azodicarbonamide additionally releases NH3, N2.

§ 11Toxicological Information

▾

Acute oral toxicity (LD50, rat): Not classified (> 2000 mg/kg expected)
Skin irritation: Not classified for solid article in supplied form.
Eye irritation: Mechanical irritation possible from dust.
Respiratory sensitization: Not classified.
Carcinogenicity: Not classified.
Mutagenicity / reproductive tox.: No known effects based on current data.

§ 12Ecological Information

▾

Aquatic toxicity: Not classified — substance is essentially inert in water.
Persistence: Persistent in environment — polymer fragments are not readily biodegradable.
Bioaccumulation: No bioaccumulation potential expected.

§ 13Disposal Considerations

▾

Product disposal: Dispose in accordance with local, provincial, state and federal regulations. Recycle polymer fractions through certified plastic recyclers where possible.
Packaging disposal: Recycle empty bags / liners after thorough emptying.
Waste codes: Non-hazardous solid waste (EWC 07 02 13 typical).

§ 14Transport Information

▾

Status: Not regulated for transport under DOT / IATA / IMDG / ADR / TDG.

§ 15Regulatory Information

▾

REACH (EC 1907/2006): All components registered or exempt. No SVHC listed above 0.1 % w/w.
RoHS (EU 2011/65): Heavy metals < 1000 ppm (Pb, Hg, Cr⁶⁺) and < 100 ppm (Cd).
Food contact: Not intended for food-contact applications.
WHMIS 2015 (Canada): Not classified as a hazardous product.
TSCA / DSL: All substances listed on US TSCA and Canadian DSL inventories.

§ 16Other Information

▾

Revision: Rev. 2026-06-15 (representative industry-standard datasheet).
Disclaimer: Information provided in good faith based on current knowledge. No warranty expressed or implied. User is responsible for verifying suitability for end use and compliance with local regulations.
Document: SDS for LU

This SDS is provided as representative industry-standard guidance. For project-specific binding documentation, please request the formal current revision via the technical contact above.

Technical knowledge for PVC Internal and External Lubricants

Engineering and purchasing guidance written for this material — understand it, apply it, compare options, specify a grade, and fix production problems.

Foundation Articles

PVC Additives Explained: Stabilizers, Lubricants, Processing Aids and Impact Modifiers

Application Guides

Comparison Articles

Calcium-Zinc vs Lead vs Tin Stabilizers: Selection for Rigid and Flexible PVC

Troubleshooting Guides

Internal vs External Lubricants in PVC: Balance, Fusion Time and Plate-Out

Browse the full Knowledge Center →

Need help sourcing this product?

Send us your product name, quantity, application, destination, and required documents. We will review your request and help compare available supply options.

Submit RFQ Contact Allzone

Pricing and availability depend on quantity, destination, supplier confirmation and market conditions.

Continue the buyer journey — related grades, industry solutions, bulk supply, engineering tools and technical documents.

Industry & regional solutions

Ontario Plastics DistributorProvince of Ontario

Bulk & container-direct supply

Continue learning

Engineering tools & documents

Ready to move forward? Send an RFQ — we usually acknowledge enquiries within one business day.

Products Get Quote Call