EVA Resin
Allzone Trading supplies eva resin to plastics processors, compounders and manufacturing plants in Toronto, the GTA, Ontario, Quebec and across Canada. EVA is supplied across a range of vinyl acetate contents and melt indices, each targeting a specific foam, film or adhesive process. Grade and specification are confirmed against supplier documentation at quotation.
At a glance
- Product
- EVA Resin
- Grades
- Grade confirmed at quotation
- Typical applications
- Foam sheet and footwear midsoles · Hot melt adhesive formulation · Film modification and sealant layers
- Packaging
- Packaging confirmed at quotation against the supplier specification
- • Certificate of Analysis is provided against the confirmed shipment, grade and batch.
- • Manufacturer TDS and SDS are subject to grade and supplier confirmation and are available on request.
- • Grades, packaging and origin above are indicative sourcing options and are confirmed at quotation.
Available grades from container-direct sourcing
Grade confirmed at quotation
Grade, specification and documentation are quoted and confirmed against the supplier technical data sheet before any order is placed.
Typical applications
- Foam sheet and footwear midsoles
- Hot melt adhesive formulation
- Film modification and sealant layers
- Solar module encapsulant
- Cable compounding
Why Canadian buyers choose us
- Resin, masterbatch, additive and consumable enquiries handled as separate specifications
- Grade, melt index and additive loading confirmed in writing before order confirmation
- Supplier technical data sheets and safety data sheets requested and shared before purchase
- LTL, FTL and container-direct freight across Ontario, Quebec and Western Canada
- Quantities reviewed per enquiry, from single pallets to full container loads
Typical industries served
Material identity
Ethylene vinyl acetate (EVA) resin — identifiers and the names buyers use
- Polymer family
- Ethylene copolymer
- Common abbreviations
- EVA
- Physical form
- Pellet / granule
Also searched as
Abbreviations
Industry terminology
Identifiers are published for material identification. The exact specification of any offered grade is confirmed against supplier documentation at quotation.
Buyer intent coverage
Ethylene vinyl acetate (EVA) resin — what it is, where it is used, how it is chosen
EVA is specified by vinyl acetate (VA) content together with melt index, and those two numbers place a grade in one of several distinct markets: low-VA film sealant layers, mid-VA hot-melt adhesive bases, and higher-VA foam and encapsulant grades. A buyer asking simply for EVA is usually asking for one of these, and the VA figure is the fastest way to resolve which.
Primary uses
- Sealant layers and impact modification in multilayer packaging film
- Hot-melt adhesive formulation for packaging and woodworking
- Crosslinked foam for footwear, sports and gasket applications
Applications
- Coextruded film seal layers and lamination tie layers
- Hot-melt adhesive compounding
- Footwear midsoles, sheet foam and technical foam parts
- Wire and cable compounding and photovoltaic encapsulation grades
Advantages
- Low seal initiation temperature improves line speed on packaging equipment
- Flexible and tough at low temperature without plasticiser
- Broad VA range allows the same chemistry to serve very different markets
Limitations to consider
- Higher VA reduces stiffness and heat resistance and increases blocking tendency
- Acetic-acid odour can develop if processed above the grade's temperature window
- Pellets are prone to blocking in warm storage at higher VA levels
How to choose the right grade
- State the VA content and melt index of the incumbent grade first
- Match the seal initiation temperature required by the packaging line
- For foam, confirm whether a crosslinkable grade is required
- Exact specification is confirmed against supplier documentation at quotation.
Typical grades
- Low-VA film grades
- Mid-VA hot-melt and adhesive grades
- High-VA foam and encapsulant grades
- Crosslinkable grades
Comparable materials — how Ethylene vinyl acetate (EVA) resin sits against alternatives
- LLDPE plastomers where lower VA-driven tack is preferred
- Ionomer where higher seal strength through contamination is required
- TPE where elastomeric behaviour is needed instead of a copolymer
Comparable-material reference. Grade selection is confirmed at RFQ against your process.
Procurement coverage
How to specify, order and receive Ethylene vinyl acetate (EVA) resin
Written for procurement, quality and technical buyers in Canada and the United States. No numeric price, MOQ, stock or lead-time value is published — those are confirmed per shipment in the quotation and against the confirmed batch.
How buyers specify at RFQ
- Vinyl acetate content (%) and tolerance
- Melt index with test conditions
- Seal initiation temperature required
- Process — film, foam, adhesive compounding or cable
- Anti-block requirement for pellet handling
Packaging options (industry-standard)
- 25 kg bag — the standard format for small and medium converters
- Octabin or jumbo / FIBC bag for higher-volume moulding and extrusion lines
- Bulk silo truck or rail hopper where the plant has compatible intake and drying
- Packaging options and available pack sizes are confirmed with each quotation.
Storage & handling
- Store sealed, dry and off the floor; moisture pick-up shows up as splay, voids and property loss
- Keep hygroscopic polymers in their original sealed packaging until they go to the dryer
- Rotate stock and record lot numbers against each production run for traceability
- Store below the temperature at which higher-VA pellets block in the bag
Documentation available
- Technical data sheet (TDS) for the exact grade offered, including the declared melt index and density
- Safety data sheet (SDS) in the format required for Canadian import
- Certificate of analysis (COA) against the confirmed production lot
- Food-contact or regulatory declaration where the end use requires it
- Documentation is confirmed per batch at quotation; availability depends on the grade and supplier offered.
RFQ checklist for eva-resin-canada
Include these fields to receive an accurate Canada-landed quotation
- Base polymer and the process the material runs on (extrusion, injection, blow moulding, thermoforming)
- Machine type, output rate and the processing temperature window
- End application and whether the finished part is food-contact, potable-water or outdoor
- Annual volume and expected per-shipment quantity
- Packaging format your intake and feeding system can receive
- Documentation required per shipment
- Delivery province or port of discharge
- VA content and melt index being matched
- Whether the end use is film, adhesive, foam or cable
- Reference grade names are widely used as shorthand in enquiries. They are treated here as search language only: an equivalent is confirmed by comparing declared datasheet values and by a line trial, and no grade is presented as a drop-in replacement for another.
- Buyers searching for an alternative or second-source supplier should state the incumbent grade and the property they are matching, because a like-for-like comparison depends on the declared datasheet values and on line trials, not on the material name alone.
Technical & procurement detail
Where eva resin is used+
EVA is supplied across a range of vinyl acetate contents and melt indices, each targeting a specific foam, film or adhesive process. It is quoted for the specific process, machine and end-application described in the enquiry, because performance depends on the processing window rather than on a single published value.
Grades are not interchangeable+
Different grades of eva resin are supplied and quoted as separate specifications. A grade supplied for one process, resin system or end-use is not presented as suitable for another. State the resin, process, machine type and end-application in your enquiry so the correct grade and documentation are reviewed with the supplier.
How specifications are confirmed+
Allzone does not publish assumed purity, melt index, loading level, particle size, origin, certification, regulatory approval, packaging or price values. Grade, specification and documentation are confirmed in writing against supplier technical data sheets and safety data sheets before an order is placed.
Frequently asked questions
What grade of eva resin do you supply?+
The grade and specification are confirmed at quotation against the supplier technical data sheet. No specification or certification value is published in advance.
Can I request a technical data sheet and a safety data sheet?+
Yes. Both the supplier technical data sheet and the safety data sheet for the quoted grade are provided on request and should be reviewed before purchase and use.
Do you deliver eva resin across Ontario and Quebec?+
Yes. Freight is arranged across Toronto, the GTA, Ontario, Quebec and Western Canada, and the delivery method is confirmed with the quotation.
What quantities can you supply?+
Quantities are reviewed per enquiry, from single pallets to full container loads.
Technical knowledge for EVA Resin Supplier — Ontario & Canada
Engineering and purchasing guidance written for this material — understand it, apply it, compare options, specify a grade, and fix production problems.
Application Guides
Comparison Articles
Buying Guides
Related products
Materials commonly quoted alongside EVA Resin by the same plants.
Calcium Carbonate (CaCO3) Filler & Masterbatch
Mineral filler — raffia woven sacks and FIBC liners
Titanium Dioxide (TiO2)
Pigment — plastic white masterbatch (PE / PP / PS / PET)
Talc Filler & Talc Masterbatch
Mineral carrier and flow aid — polypropylene automotive bumpers and interior trim
Barium Sulfate
Mineral filler — density and sound damping compounds
Need a quote on EVA Resin?
Request pricing, TDS/SDS and available documentation. We usually acknowledge enquiries within one business day; samples are subject to supplier availability and product classification.