Eco-Bio100Category M Bio-Based Formulation

Biodegradable Functional Additive Masterbatch

Functional additive masterbatch supplied on a PE/PP-compatible carrier for flexible packaging and blown film lines. Dosage, performance and any certification status are confirmed per grade against the supplier technical documentation issued with the offer.

High-Margin Functional Additives FDA REACH TDS SDS

View TDS View SDS Request Full TDS

Logistics & Documentation

Plastic-Pallet Option · Import Documentation Support

Lead Time: Depends on supplier stock, production schedule, shipping route and destination. GTA dispatch typically targets 24–48 hours on confirmed stock items.
Packaging Option: Injection-molded plastic pallets available on request as an alternative to wooden pallets, subject to supplier capability and order size.
Documentation Support: Import documentation support available. Available documents may include TDS, SDS, COA, origin documents and compliance declarations where applicable.

Additive identity

Values below are taken from the product record or the supplier technical data sheet held on file. Anything not shown here is confirmed in writing at quotation.

Delivery form: Masterbatch
Carrier resin: PE/PP compatible
Compatible polymers: Polyethylene, Polypropylene
Food-contact status: FDA declared on the product compliance record
Regulatory status: REACH

Verified data

Only values printed on the supplier technical documents or recorded against this product are shown. Anything absent is confirmed at quotation rather than estimated here.

Food contact reference on record

An FDA food-contact reference is recorded for this product. Food-contact suitability is confirmed per grade and per shipment against the supplier declaration at quotation.

Carrier & host polymer compatibility

Polymer	Stated as	Source
PP	Carrier stated on product record	Product record
PE	Carrier stated on product record	Product record

Polymers not listed are not claimed. Compatibility with your own resin grade and line is confirmed on trial.

Biodegradable Functional Additive Masterbatch — category illustration — Category illustration — actual product appearance may vary by grade and batch.

About this product

Biodegradable Functional Additive Masterbatch — product overview

Eco-Bio100 is a functional additive masterbatch supplied on a PE/PP-compatible carrier for conventional flexible packaging and blown-film lines. Allzone does not publish a dosage, biodegradation mechanism or certification status for this record: dosage and any performance or certification wording are confirmed per grade against the supplier technical documentation issued with the offer. Certification of a finished article against a specific standard cannot be inferred from an additive alone — it requires third-party testing on the buyer's own converted article, in the specific matrix and thickness.

Document & COA status

• TDS: Displayed properties are an Allzone technical reference; manufacturer documentation is available on request.
• SDS: Safety data is subject to grade and supplier confirmation. One SDS does not necessarily apply to every grade or supplier.
• COA: Certificate of Analysis is provided against the confirmed shipment, grade and batch. No stock, lead-time or regulatory claim is implied without written confirmation.

Technical Data Sheet

TDS · Eco-Bio100

Product form

Pellets (cylindrical, 2–4 mm)

Appearance

Off-white to white cylindrical pellets

Carrier / matrix

PE/PP Compatible Carrier

Key Physical & Chemical Properties

Active content (CaO)	≥ 80 %
Moisture absorption capacity	≥ 20 % w/w
Carrier	Polyolefin compatible
Bulk density	0.9 – 1.1 g/cm³
Pellet size	2 – 4 mm

Recommended dosage

1.0 – 3.0 % by weight

Processing temperature

180 – 230 °C

Packaging

25 kg multi-wall poly-woven bag with PE inner liner, 1000 kg FIBC, or 25 MT FCL bulk.

Shelf life

24 months from production date in unopened original packaging.

Storage

Store dry below 35 °C, away from direct sunlight, ignition sources and incompatible chemicals.

Target Applications

Recycled PP / PE compounding
High mineral-filled compounds
Blown film and extrusion of recyclate
Removal of silver streaks and porosity

Key Features

Chemically eliminates trapped moisture
Improves surface finish and mechanicals of recyclate
Compatible with most polyolefin processes
Reduces scrap rate and rework

Safety Data Sheet · GHS / OSHA HazCom / WHMIS 2015

SDS · Eco-Bio100

Signal word

Not classified

Not classified as hazardous under OSHA HazCom 2012 / GHS / WHMIS 2015.

§ 1Identification

▾

Product code: Eco-Bio100
Product name: Biodegradable Functional Additive Masterbatch
Product use: Industrial raw material — Blown Film Packaging, Agricultural Liners.
Restrictions: Industrial use only. Not for direct consumer sale unless explicitly labelled food/feed grade.
Supplier: Allzone Trading Corp.
Address: Ontario, Canada
Technical contact: technical@allzonetrading.ca · +1 (437) 297-6255
Emergency: CHEMTREC +1 800 424 9300 / CANUTEC +1 613 996 6666

§ 2Hazards Identification

▾

GHS classification: Not classified as hazardous under OSHA HazCom 2012 / GHS / WHMIS 2015.
Signal word: Not classified
Pictograms: None required.
Hazard statements: No GHS hazard statements apply to this article in supplied form.
Precautionary statements: P210 Keep away from heat, sparks, open flames and hot surfaces.

§ 3Composition / Information on Ingredients

▾

Mixture: Engineered high-margin functional additives based biodegradable functional additive masterbatch.
Carrier: PE/PP Compatible Carrier

§ 4First Aid Measures

▾

Inhalation: Move to fresh air. Get medical advice if discomfort persists.
Skin contact: Wash with soap and water. Get medical advice if irritation persists.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do.
Ingestion: Rinse mouth. Do not induce vomiting. Seek medical advice if discomfort persists.
Hot melt burns: For pellet-form products processed at melt temperature: cool affected area with cold water. Do NOT peel solidified polymer from skin — seek medical attention.

§ 5Fire-Fighting Measures

▾

Suitable extinguishing media: Water spray, dry chemical, CO2, foam.
Unsuitable media: None known.
Special hazards: Combustion may produce CO, CO2 and dense black smoke. Polymer melt drips during fire.
PPE for firefighters: Self-contained breathing apparatus (SCBA) and full protective gear.

§ 6Accidental Release Measures

▾

Personal precautions: Wear PPE per Section 8. Avoid generating dust. Ventilate area.
Environmental precautions: Prevent entry into drains, waterways or soil. Notify authorities if significant release.
Cleanup: Sweep or vacuum spilled material into labelled container for recycling or disposal.

§ 7Handling & Storage

▾

Handling: Handle in well-ventilated areas. Avoid generating dust. Use appropriate PPE.
Storage: Store dry below 35 °C, away from direct sunlight and ignition sources.
Incompatible materials: Strong oxidizers.

§ 8Exposure Controls / Personal Protection

▾

Engineering controls: Local exhaust ventilation at material transfer and melt-processing points. Maintain dust below regional OEL.
Respiratory protection: Dust mask if fines / dust generated.
Hand protection: Heat-resistant gloves when handling molten polymer; cotton gloves for cold pellets.
Eye protection: Safety glasses with side shields; chemical splash goggles when handling powders or molten material.
Body protection: Long-sleeve work clothing. Full chemical apron for corrosive products.
Exposure limits: Follow nuisance-dust limits (10 mg/m³ total, 5 mg/m³ respirable).

§ 9Physical & Chemical Properties

▾

Physical state: Solid pellets / powder
Color: White / off-white / pre-colored
Odor: Odorless to faint polymer odor
pH (1 % solution): Not applicable (insoluble)
Melting / decomposition: Polymer melt 110 – 250 °C (matrix dependent)
Flash point: Not applicable (solid article)
Solubility (water): Insoluble
Density: 0.9 – 2.2 g/cm³ depending on grade

§ 10Stability & Reactivity

▾

Stability: Stable under normal storage and handling conditions.
Conditions to avoid: Excessive heat, ignition sources, prolonged UV exposure.
Hazardous decomposition products: CO, CO2, polymer fragment volatiles. Azodicarbonamide additionally releases NH3, N2.

§ 11Toxicological Information

▾

Acute oral toxicity (LD50, rat): Not classified (> 2000 mg/kg expected)
Skin irritation: Not classified for solid article in supplied form.
Eye irritation: Mechanical irritation possible from dust.
Respiratory sensitization: Not classified.
Carcinogenicity: Not classified.
Mutagenicity / reproductive tox.: No known effects based on current data.

§ 12Ecological Information

▾

Aquatic toxicity: Not classified — substance is essentially inert in water.
Persistence: Persistent in environment — polymer fragments are not readily biodegradable.
Bioaccumulation: No bioaccumulation potential expected.

§ 13Disposal Considerations

▾

Product disposal: Dispose in accordance with local, provincial, state and federal regulations. Recycle polymer fractions through certified plastic recyclers where possible.
Packaging disposal: Recycle empty bags / liners after thorough emptying.
Waste codes: Non-hazardous solid waste (EWC 07 02 13 typical).

§ 14Transport Information

▾

Status: Not regulated for transport under DOT / IATA / IMDG / ADR / TDG.

§ 15Regulatory Information

▾

REACH (EC 1907/2006): All components registered or exempt. No SVHC listed above 0.1 % w/w.
RoHS (EU 2011/65): Heavy metals < 1000 ppm (Pb, Hg, Cr⁶⁺) and < 100 ppm (Cd).
Food contact: Complies with FDA 21 CFR 178.3297 (colorants for polymers) where applicable.
WHMIS 2015 (Canada): Not classified as a hazardous product.
TSCA / DSL: All substances listed on US TSCA and Canadian DSL inventories.

§ 16Other Information

▾

Revision: Rev. 2026-06-15 (representative industry-standard datasheet).
Disclaimer: Information provided in good faith based on current knowledge. No warranty expressed or implied. User is responsible for verifying suitability for end use and compliance with local regulations.
Document: SDS for Eco-Bio100

This SDS is provided as representative industry-standard guidance. For project-specific binding documentation, please request the formal current revision via the technical contact above.

Technical knowledge for Biodegradable Functional Additive Masterbatch

Engineering and purchasing guidance written for this material — understand it, apply it, compare options, specify a grade, and fix production problems.

Application Guides

Anti-Scratch Additives for PP and Automotive Interior Plastics

Comparison Articles

Buying Guides

Troubleshooting Guides

Browse the full Knowledge Center →

Need help sourcing this product?

Send us your product name, quantity, application, destination, and required documents. We will review your request and help compare available supply options.

Submit RFQ Contact Allzone

Pricing and availability depend on quantity, destination, supplier confirmation and market conditions.

Continue the buyer journey — related grades, industry solutions, bulk supply, engineering tools and technical documents.

Industry & regional solutions

Continue learning

Engineering tools & documents

Ready to move forward? Send an RFQ — we usually acknowledge enquiries within one business day.

Products Get Quote Call