Plastic Project Enclosures — Equipment Housing Components
Allzone Trading supplies plastic project enclosures and equipment housings to OEMs, panel builders and instrument assemblers in Ontario, Quebec and across Canada. Size, material, lid style, gasketing and mounting arrangement differ by programme and are confirmed against supplier technical data at quotation.
At a glance
- Product
- Plastic Project Enclosures
- Grades
- Equipment Housing Components
- Typical applications
- Control and instrumentation assemblies · OEM equipment housings · Sensor and junction boxes
- Packaging
- Packaging confirmed at quotation
- • Certificate of Analysis is provided against the confirmed shipment, grade and batch.
- • Manufacturer TDS and SDS are subject to grade and supplier confirmation and are available on request.
- • Grades, packaging and origin above are indicative sourcing options and are confirmed at quotation.
Available grades from container-direct sourcing
Equipment Housing Components
Dimensions, material and connection detail confirmed against supplier technical data at quotation.
Typical applications
- Control and instrumentation assemblies
- OEM equipment housings
- Sensor and junction boxes
- Automation and machinery panels
- Field and outdoor device enclosures
Why Canadian buyers choose us
- Component enquiries handled against your drawing, sample or existing part reference
- Material, dimensions, thread and connection detail confirmed in writing before order confirmation
- Supplier technical drawing and material declaration provided for the exact part offered
- LTL and FTL freight to manufacturers, packers and OEMs across Ontario, Quebec and Western Canada
- Quantities reviewed per enquiry, from trial cartons to full container loads
Typical industries served
Technical & procurement detail
What plastic project enclosures do+
An enclosure defines what the assembly inside has to survive. It carries the internal components on bosses or a mounting plate, closes against dust and moisture at the lid seal, and provides the wall the cable entries pass through — which is why enclosure and cable gland are specified together rather than separately.
Common types within this family+
This page covers the family as a whole: screw-lid project boxes, hinged and latched enclosures, gasketed sealed enclosures, wall-mount and DIN-compatible housings, enclosures with internal mounting plates. Individual sizes, threads, colours and geometries are quoted from your specification rather than listed as separate products.
Material options+
Housings are commonly moulded in ABS for indoor use and polycarbonate where impact strength or outdoor exposure matters, with a moulded or fitted elastomer gasket at the lid. The material and gasket combination offered is confirmed with the supplier for your application.
Selection considerations+
Start from the internal envelope — the board, terminal block or device plus the clearance the wiring needs — and only then choose the external size. Confirm the mounting method, the lid style your service routine needs, and where the cable entries fall, because a knockout in the wrong wall is a mould change rather than a modification.
What to include in your enquiry+
Send the internal dimensions required, the material preference, the lid and fixing style, the mounting method, the number and size of cable entries, the colour, any environmental requirement and the annual or per-order quantity.
Documentation and specification+
Allzone confirms material, dimensions and connection detail with the supplier before quoting, and shares the technical drawing and material declaration for the exact part offered. No dimension, pressure rating, material approval or certification is assumed on this page — every value is verified against supplier documentation at quotation.
Frequently asked questions
Do these enclosures carry an IP or NEMA rating?+
No rating is claimed on this page. Any ingress-protection or enclosure-type rating is confirmed from the supplier's documentation for the specific housing, gasket and entry arrangement being quoted.
Can cable entries be pre-machined?+
Machining, knockouts and cut-outs are quoted per enquiry against your drawing. Whether a given housing can be modified depends on the tool and the wall design.
Can you quote against a drawing or a sample part?+
Yes. A drawing, a photograph or an existing part reference is usually the fastest route to an accurate quotation for a moulded component.
What quantities are quoted?+
Quantities are reviewed per enquiry. Moulded components are normally quoted per carton or per container load depending on the part and the programme.
Are certifications available?+
Any certification, approval or rating is confirmed for the specific supplier and part at quotation. Nothing is claimed on this page in advance.
Technical knowledge for Plastic Project Enclosures & Equipment Housings — Canada
Engineering and purchasing guidance written for this material — understand it, apply it, compare options, specify a grade, and fix production problems.
Foundation Articles
Application Guides
Comparison Articles
Buying Guides
Related products
Materials commonly quoted alongside Plastic Project Enclosures by the same plants.
Industrial Plastic Caps & Plugs
Hydraulic equipment and port protection
Machine Feet & Levelling Mounts
Machinery and equipment frames
Plastic Knobs & Machine Handles
Machine guard and access panel fastening
Plastic Tube, Pipe & Hose Fittings
Fluid handling and dosing systems
Need a quote on Plastic Project Enclosures?
Request pricing, TDS/SDS and available documentation. We usually acknowledge enquiries within one business day; samples are subject to supplier availability and product classification.