ABS Resin
Allzone Trading supplies abs resin to plastics processors, compounders and manufacturing plants in Toronto, the GTA, Ontario, Quebec and across Canada. ABS is supplied in injection, extrusion, plating and flame-retardant grades selected by impact and heat requirements. Grade and specification are confirmed against supplier documentation at quotation.
At a glance
- Product
- ABS Resin
- Grades
- Grade confirmed at quotation
- Typical applications
- Automotive interior parts · Appliance housings · Electrical enclosures
- Packaging
- Packaging confirmed at quotation against the supplier specification
- • Certificate of Analysis is provided against the confirmed shipment, grade and batch.
- • Manufacturer TDS and SDS are subject to grade and supplier confirmation and are available on request.
- • Grades, packaging and origin above are indicative sourcing options and are confirmed at quotation.
Available grades from container-direct sourcing
Grade confirmed at quotation
Grade, specification and documentation are quoted and confirmed against the supplier technical data sheet before any order is placed.
Typical applications
- Automotive interior parts
- Appliance housings
- Electrical enclosures
- Extruded sheet and thermoforming
- Plated ABS components
Why Canadian buyers choose us
- Resin, masterbatch, additive and consumable enquiries handled as separate specifications
- Grade, melt index and additive loading confirmed in writing before order confirmation
- Supplier technical data sheets and safety data sheets requested and shared before purchase
- LTL, FTL and container-direct freight across Ontario, Quebec and Western Canada
- Quantities reviewed per enquiry, from single pallets to full container loads
Typical industries served
Material identity
Acrylonitrile butadiene styrene (ABS) resin — identifiers and the names buyers use
- Polymer family
- Styrenic terpolymer
- Common abbreviations
- ABS
- Physical form
- Pellet / granule
Also searched as
Abbreviations
Industry terminology
Identifiers are published for material identification. The exact specification of any offered grade is confirmed against supplier documentation at quotation.
Buyer intent coverage
Acrylonitrile butadiene styrene (ABS) resin — what it is, where it is used, how it is chosen
ABS is the workhorse for tough, well-finished mouldings and is bought against three practical requirements: impact level, heat deflection temperature and surface finish. Southwestern Ontario automotive and appliance moulders drive most of the Canadian volume, alongside extruders producing sheet for thermoformed panels. Flame-retardant and plating grades are separate commercial conversations, not variants of a general-purpose grade.
Primary uses
- Injection moulding of tough housings, panels and structural parts
- Sheet extrusion for thermoformed liners and covers
- Parts requiring electroplating or high-gloss painted finish
Applications
- Automotive interior trim and under-hood non-heat components
- Appliance housings, refrigerator liners and power-tool bodies
- Electrical enclosures and consumer product casings
Advantages
- Good balance of impact strength, rigidity and surface finish
- Machines, bonds and paints better than most polyolefins
- Available in flame-retardant and plateable grade families
Limitations to consider
- Hygroscopic — must be dried or the surface shows splay and streaking
- Limited weathering resistance without a capped or stabilised system
- Poor resistance to many solvents and to prolonged UV exposure
How to choose the right grade
- Start from the process, not the polymer name — the melt index window for film extrusion, injection moulding and blow moulding are different
- Match the declared density and melt index to the incumbent grade before comparing anything else
- Confirm whether the end part is food-contact, potable-water or outdoor, because that narrows the acceptable grade list
- Check additive package (slip, antiblock, antioxidant, UV) — an apparently identical grade can behave differently on the line
- Exact specification is confirmed against supplier documentation at quotation.
- If the part is plated or painted, confirm the grade family supports it — general-purpose grades usually do not
Typical grades
- General-purpose injection grades
- High-impact grades
- High-heat grades
- Flame-retardant grades
- Plating grades
- Extrusion / sheet grades
Comparable materials — how Acrylonitrile butadiene styrene (ABS) resin sits against alternatives
- HIPS where cost matters more than toughness and finish
- PC/ABS blends where higher heat and impact are required
- PP where chemical resistance outweighs surface finish
Comparable-material reference. Grade selection is confirmed at RFQ against your process.
Procurement coverage
How to specify, order and receive Acrylonitrile butadiene styrene (ABS) resin
Written for procurement, quality and technical buyers in Canada and the United States. No numeric price, MOQ, stock or lead-time value is published — those are confirmed per shipment in the quotation and against the confirmed batch.
How buyers specify at RFQ
- Melt flow index / melt index with the test load and temperature
- Density or specific gravity
- Process and machine type the grade must run on
- Additive package already present in the grade
- Colour requirement — natural, pre-coloured or to be coloured with masterbatch
- Regulatory status required for the finished part
- Heat deflection temperature required
- Flame rating required and the thickness it must be met at
Packaging options (industry-standard)
- 25 kg bag — the standard format for small and medium converters
- Octabin or jumbo / FIBC bag for higher-volume moulding and extrusion lines
- Bulk silo truck or rail hopper where the plant has compatible intake and drying
- Packaging options and available pack sizes are confirmed with each quotation.
Storage & handling
- Store sealed, dry and off the floor; moisture pick-up shows up as splay, voids and property loss
- Keep hygroscopic polymers in their original sealed packaging until they go to the dryer
- Rotate stock and record lot numbers against each production run for traceability
- Dry before processing to the supplier's stated condition; ABS picks up moisture in the bag
Documentation available
- Technical data sheet (TDS) for the exact grade offered, including the declared melt index and density
- Safety data sheet (SDS) in the format required for Canadian import
- Certificate of analysis (COA) against the confirmed production lot
- Food-contact or regulatory declaration where the end use requires it
- Documentation is confirmed per batch at quotation; availability depends on the grade and supplier offered.
RFQ checklist for abs-resin-canada
Include these fields to receive an accurate Canada-landed quotation
- Base polymer and the process the material runs on (extrusion, injection, blow moulding, thermoforming)
- Machine type, output rate and the processing temperature window
- End application and whether the finished part is food-contact, potable-water or outdoor
- Annual volume and expected per-shipment quantity
- Packaging format your intake and feeding system can receive
- Documentation required per shipment
- Delivery province or port of discharge
- Impact, heat and flame requirements, and the incumbent grade being matched
- Whether the part is plated, painted or left as moulded
- Reference grade names are widely used as shorthand in enquiries. They are treated here as search language only: an equivalent is confirmed by comparing declared datasheet values and by a line trial, and no grade is presented as a drop-in replacement for another.
- Buyers searching for an alternative or second-source supplier should state the incumbent grade and the property they are matching, because a like-for-like comparison depends on the declared datasheet values and on line trials, not on the material name alone.
Technical & procurement detail
Where abs resin is used+
ABS is supplied in injection, extrusion, plating and flame-retardant grades selected by impact and heat requirements. It is quoted for the specific process, machine and end-application described in the enquiry, because performance depends on the processing window rather than on a single published value.
Grades are not interchangeable+
Different grades of abs resin are supplied and quoted as separate specifications. A grade supplied for one process, resin system or end-use is not presented as suitable for another. State the resin, process, machine type and end-application in your enquiry so the correct grade and documentation are reviewed with the supplier.
How specifications are confirmed+
Allzone does not publish assumed purity, melt index, loading level, particle size, origin, certification, regulatory approval, packaging or price values. Grade, specification and documentation are confirmed in writing against supplier technical data sheets and safety data sheets before an order is placed.
Frequently asked questions
What grade of abs resin do you supply?+
The grade and specification are confirmed at quotation against the supplier technical data sheet. No specification or certification value is published in advance.
Can I request a technical data sheet and a safety data sheet?+
Yes. Both the supplier technical data sheet and the safety data sheet for the quoted grade are provided on request and should be reviewed before purchase and use.
Do you deliver abs resin across Ontario and Quebec?+
Yes. Freight is arranged across Toronto, the GTA, Ontario, Quebec and Western Canada, and the delivery method is confirmed with the quotation.
What quantities can you supply?+
Quantities are reviewed per enquiry, from single pallets to full container loads.
Technical knowledge for ABS Resin Supplier — Ontario & Canada
Engineering and purchasing guidance written for this material — understand it, apply it, compare options, specify a grade, and fix production problems.
Application Guides
Comparison Articles
Buying Guides
Troubleshooting Guides
Related products
Materials commonly quoted alongside ABS Resin by the same plants.
Polystyrene (PS) Resin
Injection moulded housings and disposables
Expandable Polystyrene (EPS) Resin
Standard packaging and flame-retardant construction (F-Grade) profiles engineered for rapid pre-expansion and consistent insulation fusion.
Polymer Coupling Agent and Compatibilizer
High-performance Maleic Anhydride Grafted Polymer designed to optimize resin blending, restore chain integrity in recycled PCR plastics, and ensure…
Need a quote on ABS Resin?
Request pricing, TDS/SDS and available documentation. We usually acknowledge enquiries within one business day; samples are subject to supplier availability and product classification.