HVAC Condensate Drain Fittings — Condensate Management Components
Allzone Trading supplies condensate drain fittings to HVAC distributors, mechanical contractors and equipment OEMs in Ontario, Quebec and across Canada. Connection size, trap style and material differ by programme and are confirmed against supplier technical data at quotation.
At a glance
- Product
- HVAC Condensate Drain Fittings
- Grades
- Condensate Management Components
- Typical applications
- Air handling unit drain assemblies · Fan coil and split system condensate lines · Refrigeration and cold room drainage
- Packaging
- Packaging confirmed at quotation
- • Certificate of Analysis is provided against the confirmed shipment, grade and batch.
- • Manufacturer TDS and SDS are subject to grade and supplier confirmation and are available on request.
- • Grades, packaging and origin above are indicative sourcing options and are confirmed at quotation.
Available grades from container-direct sourcing
Condensate Management Components
Dimensions, material and connection detail confirmed against supplier technical data at quotation.
Typical applications
- Air handling unit drain assemblies
- Fan coil and split system condensate lines
- Refrigeration and cold room drainage
- Rooftop unit drain connections
- Dehumidifier and process cooling equipment
Why Canadian buyers choose us
- Component enquiries handled against your drawing, sample or existing part reference
- Material, dimensions, thread and connection detail confirmed in writing before order confirmation
- Supplier technical drawing and material declaration provided for the exact part offered
- LTL and FTL freight to manufacturers, packers and OEMs across Ontario, Quebec and Western Canada
- Quantities reviewed per enquiry, from trial cartons to full container loads
Typical industries served
Technical & procurement detail
What hvac condensate drain fittings do+
Every cooling coil produces water, and the drain assembly decides whether that water leaves the unit or ends up in the ceiling. A trap holds a seal so the fan cannot pull air through the drain line or push water back into the pan, and a clean-out tee is what makes the line serviceable once algae and dust start to build.
Common types within this family+
This page covers the family as a whole: P-style and inline condensate traps, clean-out tees with removable caps, drain pan outlet and bulkhead fittings, hose barb and hose adapter fittings, reducers and extension pieces. Individual sizes, threads, colours and geometries are quoted from your specification rather than listed as separate products.
Material options+
Fittings are commonly moulded in PVC, ABS or polypropylene with elastomer seals, in white or grey. Material and seal type are confirmed with the supplier for the equipment and drain arrangement.
Selection considerations+
Work from the unit's drain connection and whether the fan is draw-through or blow-through, because that decides the trap depth the equipment manufacturer requires — a trap that is too shallow will simply be pulled dry. Then confirm the pipe or hose the line runs in and leave a clean-out where the line can actually be reached.
What to include in your enquiry+
Send the equipment drain connection size and thread, the trap style needed, the drain line pipe or hose size, whether a clean-out is required, indoor or outdoor placement and the quantity per size.
Documentation and specification+
Allzone confirms material, dimensions and connection detail with the supplier before quoting, and shares the technical drawing and material declaration for the exact part offered. No dimension, pressure rating, material approval or certification is assumed on this page — every value is verified against supplier documentation at quotation.
Frequently asked questions
What trap depth is required?+
It is set by the equipment manufacturer's static pressure, not by the fitting. Supply the unit data and the trap is selected against it.
Are these fittings rated for pressurised drainage?+
No pressure rating is claimed here. Condensate lines are gravity systems, and any pressure or temperature limit is taken from the supplier's data for the part quoted.
Can you quote against a drawing or a sample part?+
Yes. A drawing, a photograph or an existing part reference is usually the fastest route to an accurate quotation for a moulded component.
What quantities are quoted?+
Quantities are reviewed per enquiry. Moulded components are normally quoted per carton or per container load depending on the part and the programme.
Are certifications available?+
Any certification, approval or rating is confirmed for the specific supplier and part at quotation. Nothing is claimed on this page in advance.
Technical knowledge for HVAC Condensate Drain Fittings & Traps — Canada
Engineering and purchasing guidance written for this material — understand it, apply it, compare options, specify a grade, and fix production problems.
Foundation Articles
Application Guides
Related products
Materials commonly quoted alongside HVAC Condensate Drain Fittings by the same plants.
Plastic Pipe Clips & Tube Clamps
Plumbing and potable water pipe runs
Plastic Tube, Pipe & Hose Fittings
Fluid handling and dosing systems
Plastic Quick-Connect Couplings
Water treatment and filtration equipment
Small Plastic Valves & Fluid-Control Components
Reverse osmosis and drinking water systems
Need a quote on HVAC Condensate Drain Fittings?
Request pricing, TDS/SDS and available documentation. We usually acknowledge enquiries within one business day; samples are subject to supplier availability and product classification.